Improve the design of your vehicle's rear end with this neat, clean and protective custom-made aftermarket accessory to fit your model perfectly.
Custom-made to fit your model's rear license location. Please refer to Installation PDF if you have questions.
Giving a more finished appearance to the vehicle,
this accessory provides a sturdy, more elevated mounting
for the license plate, protecting it from damage.
For specialty license plate frame enthusiasts who invest in
gold or chrome frames, or vanity frames for schools,
sports teams, favorite causes or hobbies,
this item allows for the addition
of a frame around the license and
provides ample protection for that investment.
A Quality Aftermarket Accessory
Manufactured by C&C Car Worx
– Made in the USA –
*Enjoy Free Ground Shipping on this product
within the Continental US (excluding Alaska and Hawaii)
for a Limited Time during our Happy Driver Sale!
Some Subaru and other models have holes in the front bumper, (some square, some round,) which are for non-U.S. plates. These holes are not used in the installation of this product. You will notice that on those models, the dimples are found in the area between the non-U.S. holes in the center of the bumper. And once installed, the front license plate bracket will cover up any non-U.S. holes, giving your vehicle a clean, sleek, finished appearance.
NOTE! The above bumper is a representative sample. Holes differ by model, year and location.
DOWNLOAD
INSTALLATION
INSTRUCTIONS
IMPORTANT!
Products that use tape in installation cannot be returned due to a failed installation attempt if tape liner is removed.
Please check fitment before beginning the installation.
If you need guidance, we are happy to assist you.
Just call us at +1.888.Car.Worx (1.888.227.9679) or email us at info@mycarworx.com whenever you need our help!
Email Us!
Call us!
Reviewed by K. Lee
Thursday, April 6, 2023 at 12:50:33 PM EDT
Was searching online for license plate holders and came across this on Amazon first. Unfortunately, CarWorx didn't stock these for my Forester on Amazon.com, so I went direct.
Once received I put them on and they fit like a glove. Very easy and direct instruction. The adhesive on the back is holding for now. Shipping was quick.
Reviewed by Scott Saucier
Friday, September 30, 2022 at 05:34:44 PM EDT
I almost ordered these from the dealership when I built/ordered my new 2023 Subaru Crosstrek. glad I did some research though as by ordering them here I saved about 10 dollars.
Reviewed by SS
Wednesday, June 15, 2022 at 10:33:56 PM EDT
Fit perfectly on a 2022 Subaru Outback.
Stainless steel screws.
Looks great.
Reviewed by Cal
Saturday, October 23, 2021, 05:12:06 PM EDT
My first item bought from Car Worx were the custom fit window vent visors for my 2018 Subaru Crosstrek and was so pleased with them, I had to see what else they offered. The license plate bracket bundle was a exactly what I needed and well worth the money. Relatively easy to apply, though the directions were a bit confusing to me. I figured it out just fine and ample parts were provided. The materials were of good quality and looks fantastic, especially the front bumper. Perfect fit. I would happily purchase from them again in the future.
Reviewed by Steve Spurlock
Monday, September 24, 2018 1:10 AM
Recommend if you need to replace your plate frame/ holder. Its affordable, easy to install and secure. This resolved all my issues and concerns.
Reviewed by Ed Anderson
Friday, June 29, 2018 7:49 PM
I've not only gotten this rear plate bracket but the front one as well for the 2018 Subaru Outback. They fit perfectly and look like they were made and installed by the manufacturer. Am extremely satisfied with quality, ease of installation and look of CarWorx products. If there is one thing I can suggest, especially if you need the front plate bracket is buy the bundle with frames. Much cheaper than getting them separately as I did and the frames add that extra sparkle of eye candy that boosts your car's look above the rest.
Reviewed by Richard Cellini
Monday, March 5, 2018 7:01 PM
This adds a little dress up around the rear plate as well as protection between the lic. plate and car body. Very simple to install and looks factory.
Reviewed by Chad Sparks
Sunday, March 20, 2016 12:37 PM
Great products. Both the front and rear plate bracket fits great on my Subaru Legacy
Reviewed by Mike McVicar
2016-01-06 19:11:26
Received and installed my new rear license plate bracket today. The product provides a nice detail finish to the look of my car. Price was reasonable, service great!
Reviewed by Michael Nordberg
Mon, Feb 15, 2016 at 10:38 AM
My daughter had a custom license plate frame made to replace the one I had accidentally left on my Xterra when I traded it in. The one she had made was metal and I was afraid it would scratch the paint on my 2016 Forester 2.5i. On a Forester forum several people recommended the Universal Rear License Plate Bracket. I ordered it, and it was a simple install. Each bracket is provded with four screws and a plastic washer with attached cap that snaps onto the screw heads to protect them from corrosion. I used one on the front and the rear. My front bumper only has two holes instead of four but two screws hold the bracet securely. The custom frame fit easiy in the bracket, although I had difficutly with the cap on one side at the top because of the design of the custome frame. The end result is a much more finished apperance for my vehicle. I was very pleased with my purchase and the installation.
Reviewed by Mark Jordan
Friday, December 2, 2016 6:26 AM
Looked around for a decent plate backing for my VW Golf. Ordered this and wow! Quality, fit, looks....awesome. I am glad that I found this product to tidy up my license plate area. A really nice finishing touch. A+ and highly recommended.
Reviewed by Mark Jordan
Monday, December 26, 2016 12:53 PM
Ordered one of the Universal Rear Plate holders last month....WOW. Really
cleans up the looks in the plate area, and protects the vehicle paint as
well. Awesome product and highly recommended. This one is for our other car.
Reviewed by WWJ
February 21, 2014
This review is for the C&C CarWorx RP-14 Universal Rear License Plate Frame Bracket Mount. I purchased this because the dealer frame around the licensee plate was scratching into the painted plastic surface beneath the plate. I also bought this because I bought the front license plate holder from C&C CarWorx. This was extremely easy to mount on a Subaru Crosstrek. I did not even use the adhesive strips, wasn't necessary. It comes with S/S mounting screws and black snap caps to go over the screws, which gives it a very nice look. All in all I like this product. I did however give it only fours stars as I think compared to the front holder which has some intricacy to it, that this is a tad over priced. I would buy again but it should be a little less money. Made In USA
Get the Bundled Front and Rear License Brackets for This Model at a Great Discount!
Universal Rear License Bracket by C&C CarWorx provides a protected and handsome mounting statement which enhances your vehicle's rear styling.
The C&C CarwWorx Rear License Bracket shown on a Subaru Outback gives a stylish flair to your vehicle's rear end.
From any angle, this custom manufactured, versatile aftermarket accessory by C&C CarWorx improves the look of your vehicle.
Polished Mirror Bright Stainless Steel License Plate Frame shown installed within the C&C CarWorx Front License Bracket for this model vehicle.
The C&C CarWorx Front License Bracket and Silver Stainless Steel License Plate Frame shown on a 2018 Subaru Outback gives a stylish flair to the vehicle's front end.
From any angle, the custom manufactured, versatile aftermarket accessories shown on a 2018 Subaru Legacy Sedan by C&C CarWorx improve the look of your vehicle.
.
The Polished Mirror Bright Stainless Steel License Plate Frame shown installed within the C&C CarWorx Universal Rear License Bracket sold as part of the "frame bundle" for this model vehicle.
With the addition of our handsome silver stainless steel license plate frame installed within our Universal Rear License Bracket by C&C CarWorx, your vehicle makes a classy statement which greatly enhances your vehicle's rear styling.
The C&C CarWorx Silver Stainless Steel License Plate Frame installed within our Universal Rear License Bracket shown on a 2015 Subaru Outback Wagon provides stylish flair to your vehicle's rear end.
Powder-Coated Black Stainless Steel License Plate Frame shown installed within the C&C CarWorx Front License Bracket for this model vehicle.
The C&C CarWorx Front License Bracket and Black Stainless Steel License Plate Frame shown on a 2018 Subaru Outback gives a stylish flair to the vehicle's front end.
Enhancing your front end with a classy installation of powder-coated black stainless steel license plate frame within our sturdy front license bracket, these custom-manufactured, versatile aftermarket accessories shown on a 2018 Subaru Outback Wagon by C&C CarWorx are a great long-term investment in quality.
.
The Powder-Coated Black Stainless Steel License Plate Frame shown installed within the C&C CarWorx Universal Rear License Bracket sold as part of the "frame bundle" for this model vehicle.
With the addition of our handsome black stainless steel license plate frame installed within our Universal Rear License Bracket by C&C CarWorx, your vehicle makes a classy statement which greatly enhances your vehicle's rear styling.
The C&C CarWorx Black Stainless Steel License Plate Frame installed within our Universal Rear License Bracket shown on a 2015 Subaru Outback Wagon provides stylish flair to your vehicle's rear end.
Purchase the Rear License Bracket on Sale Now!
*Enjoy Free Ground Shipping on this product
within the Continental US (excluding Alaska and Hawaii)
for a Limited Time during our Happy Driver Sale!
ATTENTION CALIFORNIA CUSTOMERS
Item # RP-17-SALE
Sale Price!
$34.10
DOWNLOAD
INSTALLATION
INSTRUCTIONS
IMPORTANT!
Products that use tape in installation cannot be returned due to a failed installation attempt if tape liner is removed.
Please check fitment before beginning the installation.
If you need guidance, we are happy to assist you.
Just call us at +1.888.Car.Worx (1.888.227.9679) or email us at info@mycarworx.com whenever you need our help!
Email Us!
Call us!
2 BIG MONEY-SAVING OPTIONS!
Buy our new universal
REAR LICENSE PLATE BRACKET
bundled
with your model's
FRONT LICENSE PLATE BRACKET
AND SAVE 23% OFF
THE COMBINED PRICE!
You can order your model's front license plate bracket
in conjunction with
our new universal REAR License Plate Bracket
which fits your model at a
combined discount price
saving you 23% off the cost of
buying each product separately!
*Enjoy Free Ground Shipping on this product
within the Continental US (excluding Alaska and Hawaii)
for a Limited Time during our Happy Driver Sale!
ATTENTION CALIFORNIA CUSTOMERS
Item # RP-17-FP-C-SALE
$63.22
Sale Price!
$58.16
Note: You will be able to select your model's Front License Bracket to complete your bundled purchase when you click the "Add to Cart" button below:
Buy our deluxe package of
Front & Rear Brackets and your choice of
two Silver Stainless Steel License Plate Frames
or two Black Stainless Steel License Plate Frames
at a huge 27% savings!
You can order your model's front license plate bracket
in conjunction with
our new universal REAR License Plate Bracket
and 2 high-quality stainless steel license plate frames
(your choice of polished mirror bright silver or powder-coated black)
which fit your model at a
combined discount price
saving you 27% off the cost of
buying each product separately!
*Enjoy Free Ground Shipping on this product
within the Continental US (excluding Alaska and Hawaii)
for a Limited Time during our Happy Driver Sale!
ATTENTION CALIFORNIA CUSTOMERS
Item #
RP-17-FP-C-FS-SALE SILVER
Item #
RP-17-FP-C-FB-SALE BLACK
$123.49
Sale Price!
$89.91
DOWNLOAD
INSTALLATION
INSTRUCTIONS
IMPORTANT!
Products that use tape in installation cannot be returned due to a failed installation attempt if tape liner is removed.
Please check fitment before beginning the installation.
If you need guidance, we are happy to assist you.
Just call us at +1.888.Car.Worx (1.888.227.9679) or email us at info@mycarworx.com whenever you need our help!
Email Us!
Call us!
Satisfaction Guaranteed!
If there is any reason
why you are not
happy with your purchase, we will accept your returns
for a full refund.*
Customer satisfaction is our top priority.
See returns policy
This is a Secure Site
You can rest assured
that your personal
information is protected from
identity theft on this site.
All products carry a 3-year/
36,000 mile warranty
unless specified otherwise
© C&C CarWorx Corp. 2007
